Installation; Location; Climate Range - Miele KF 2802 Vi Operating And Installation Instructions

Installation

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your
refrigeration appliance, please bear in
mind that it will use more energy if
installed near to a heater, a cooker or
other appliance that gives off heat.
Direct sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption of the
refrigeration appliance is.
When installing the refrigeration
appliance, please note the following:
- The socket must be easily accessible
in an emergency, not concealed
behind the appliance.
- The plug and power cable must not
touch the rear of the refrigeration
appliance as they could be damaged
by vibrations from the appliance.
- Do not plug in other appliances
behind the refrigeration appliance.
If installation near a heat source is
unavoidable, observe the following
minimum distances between the
appliance and the heat source:
- At least 3 cm
to electric or gas stoves
- At least 30 cm
to oil or coal-based stoves
If it is not possible to observe these
minimum distances, an isolation plate
must be installed between the
refrigeration appliance and the heat
source.
16

Climate range

This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use in ambient temperatures for which
it is not designed. The climate range is
stated on the data plate in the interior
cabinet of the refrigeration appliance.
Climate range
SN
N
ST
T
SN-ST
SN-T
A lower ambient temperature leads to
the compressor switching off for longer
periods. This can cause the internal
temperature in the refrigeration
appliance to rise with the risk of food
deteriorating and going off.

Risk of damage due to high
humidity.
In environments with high humidity,
condensation can build up on
external panels of the refrigeration
appliance, which can cause
corrosion.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation, make sure that the
appliance doors close properly, the
ventilation gaps are not covered and
that the appliance has been installed
in accordance with these operating
and installation instructions.
Ambient
temperature
10 to 32 °C
16 to 32 °C
16 to 38 °C
16 to 43 °C
10 to 38 °C
10 to 43 °C