Selecting Additional Settings; Switching Keypad Lock / On Or Off; Switching Eco Mode  On Or Off - Miele KF 2802 Vi Operating And Installation Instructions

Selecting additional settings

In Settings mode , you can select
different refrigeration appliance settings
and alter their settings to some extent,
allowing you to adjust the appliance to
suit your requirements.
Only the functions in Settings mode 
that require further explanation are
described below.
The door alarm and other warnings are
automatically disabled when the
appliance is in Settings mode .
Switching Keypad lock /
 on or off
Switch
Keypad lock
protect your refrigeration appliance from
unwanted temperature changes or other
unintentional adjustments in Settings
mode .
 In Settings mode , use the  and
 sensor controls to select
and select OK to confirm your
lock
selection.
 Use the  and  sensor controls to
switch the sensor lock
select OK to confirm your selection.
 The sensor lock will not be activated
until you close the appliance door.
Nothing will appear on the display to
indicate that the sensor lock is switched
on.
The message
Press OK for 6 seconds to
will appear on the display if you
unlock
select a sensor control while the sensor
lock is switched on.
 Follow the instructions on the display.
The display is unlocked briefly so you
can adjust the setting as required.
Closing the appliance door will
reactivate the sensor lock.
68
on if you wish to
Keypad
or and
On Off
Switching Eco mode  on or
off
is useful when you go on
Eco mode
holiday, for example, if you do not wish
to switch off the refrigeration appliance
completely or do not need a high degree
of cooling. Energy consumption in
is lower than in normal operation.
mode
The fridge zone is thereby regulated to a
temperature of 6 °C and the
temperature in the dry compartment in
the MasterFresh zone increases to
approx. 3 °C.
The freezer zone is regulated to a
temperature of -16 °C.
If the SuperCool  or SuperFreeze 
function is switched on, these will be
automatically switched off when
is selected.
mode
 In Settings mode , use the
 and  sensor controls to select
and select OK to confirm your
mode
selection.
 Use the  and  sensor controls to
switch the
Eco mode On
select OK to confirm your selection.
Only the changed temperatures on the
display indicate that
switched on.
Tip: You can also switch off the
function by directly adjusting the
mode
temperature  (see "The correct
temperature – Setting the
temperature").
Eco
Eco
Eco
or and
Off
is
Eco mode
Eco