Making Ice Cubes - Miele KF 2802 Vi Operating And Installation Instructions

Making ice cubes

For the automatic ice cube maker to
operate, it must be connected to a
mains water supply (see "Mains water
connection").

Risk to health due to
contaminated water.
Consuming polluted water can lead
to illnesses.
The first 3 batches of ice cubes made
after the ice cube maker is started up
must not be consumed, as the water
will have been used for the initial
rinsing of the water supply line.
This applies to the initial
commissioning as well as when using
the refrigeration appliance again after
it has been turned off for a long time.
Switching on the ice maker 
 Make sure that the ice cube container
is correctly located underneath the
ice maker.
 In Settings mode , use the
 and  sensor controls to select
and select OK to
Dispenser unit
confirm your selection.
 Use the  and  sensor controls to
select and select OK to confirm
On
your selection.
Once the freezer zone has cooled down
to its set temperature, the ice maker will
fill with water.
As soon as the water is frozen, the ice
cubes drop out of the ice maker into the
ice cube container.
Ice cube production is halted
automatically when the ice cube
container is full.
104
The ice maker can make up to approx.
1.3 kg of ice cubes in 24 hours.
The amount of ice cubes made by the
appliance depends on the temperature
in the freezer zone. The lower the
temperature, the more ice cubes are
produced.
After you have set up the appliance for
the first time, it can take up to
10 hours for the first ice cubes to drop
out of the ice maker and collect in the
ice cube container.

Risk of damage due to blocking
of the ice maker.
The ice maker could become blocked
and, as a result, be damaged.
Do not place any bottles or food into
the ice cube container to chill them
quickly.
Empty the ice cube container at
regular intervals, or if you have not
produced any ice for more than a
week. This will ensure that you
always have fresh ice and the ice
cubes will not form a clump.
Ice cube production does not stop
when the ice cube container has
been removed. Ice cubes can fall into
the freezer basket underneath.
Only remove the ice cube container
for the shortest possible time or
switch off the ice maker before
removing it.
Switching the ice maker off
The ice maker can be turned off
independently of the freezer zone if
you do not want to make any ice
cubes.