Programming The Microwave - Smeg FMS20TCK Instructions For Use Manual

Programming the Microwave

The normal functions (Microwave, Defrost by
Weight and Defrost by time) may be programmed
sequentially up to a maximum of three functions.
For example, to defrost 800 gm of meat by weight,
heat it in the microwave for ten minutes at power
4:
1. Press the DEFROST key. This key will
illuminate in green.
2. The type of food, Meat (type 1) is selected by
default.
3. Enter weight of the food (0.8 kg) by pressing
the "+" and "-" key.
4. Press the CLOCK/PROGRAMMING key in
order to access programming of the following
function.
5. Press the MICROWAVE key. This key will
illuminate in green.
6. Enter the operating time (10 minutes), by
pressing the "+" and "-"key.
7. Press the "+" and "-"key to change the
microwave power level to 4.
8. Press the CLOCK/PROGRAMMING key in
order to access programming of the following
function.
9. Enter the operating time (8 minutes), by
pressing the "+" or "-"key to increase or
decrease the operating time.
10. Press the "–"key twice to change the
microwave power level to 3.
11. Press the START key. The Microwave will
commence operation.
12. When the Microwave switches itself off and
beeps, open the door and stir the food. Close
the door again and press the START key.
14