Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks GD60BCB Operator's Manual

Hide thumbs Also See for GD60BCB:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
EN
Problem
The line keeps break-
ing.
The grass winds
around the trimmer
head and motor hous-
ing.
The line does not cut
well.
Vibration increases ob-
viously.
9

TECHNICAL DATA

Voltage
No load speed
Cutting head
Cutting line di-
ameter
Cutting path di-
ameter
Weight (without
battery pack(s)
and charger)
Battery model
Charger model
Grass trimmer
Brush cutter
Possible Cause
The machine is used incorrectly.
Cut tall grass at ground level.
The cut-off blade becomes dull.
The line is worn down at one side
and not extended in time.
60 V
-1
6000 ±10% min
(Grass trim-
-1
mer),6500 ±10% min
(Brush cut-
ter)
Bump feed / Brush cutter blade
2.0 mm / 2.4 mm
356 / 406 mm (Grass trimmer),
260 mm (Brush cutter)
3.85 kg
G60B2 / G60B4 and other BAC
series
G60UC and other CAC series
Measured
L
= 87 dB(A),
PA
sound pressure
K
= 3 dB(A)
pA
level
Guaranteed
L
= 96 dB(A)
WA.d
sound power
level
2
Vibration
7.5 m/s
2
m/s
Measured
L
= 93 dB(A),
PA
sound pressure
K= 3 dB(A)
level
English
Solution
1. Cut with the tip of the line, avoid stones, walls
and other hard objects.
2. Advance the cutting line regularly to keep full
cutting width.
1. Cut tall grass from the top down.
2. Remove no more than 20 cm in each pass to
prevent wrapping.
Sharpen the cut-off blade with a file or replace it.
Make sure that the line on both sides is equal.
Extend the line.
XX
10

WARRANTY

(The full warranty terms and conditions can be found
on Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
, k= 1.5
11

EC DECLARATION OF CONFORMITY

Name and address of the manufacturer:
10
Guaranteed
L
sound power
dB(A)
level
Vibration
3.5 m/s
m/s
96 dB. Noise value. (Grass trimmer)
105 dB. Noise value. (Brush cutter)
= 105
WA.d
2
, k= 1.5
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stc406

Table of Contents