Table of Contents
Advertisement
@
Starting without an Intro
1. Press the [SYNC] button.
The [SYNC] button's indicator will light, and the
TEMPO and [INTRO/ENDING] indicators will
begin flashing.
2. Press the flashing [INTRO/ENDING] button (indicator goes
off).
. Play a note or chord in the chord recognition area.
wW
Starting manually
If you prefer to be in complete control of the
Arranger and therefore do not want it to start as
soon as you play one or several notes, there are two
options.
Starting with an Intro
—_
. If necessary, press the [SYNC] button to switch off the Sync
Start function.
Remember that you can now play your own chords
and bass notes using the Chord and Bass parts that
are automatically assigned to the Lower section of
the keyboard.
2. Press the [INTRO/ENDING] button to start Style playback
with the corresponding Intro.
e)
fe)
ie)
e
ie)
To Variation
To Original
Sync
Intro
Start
Fill In
E
Stop
During the Intro, the [INTRO/ENDING] button's
indicator will be lit. When the Intro is over, the indi-
cator will go off.
Starting without an Intro
1. If necessary, press the [SYNC] button to switch off the Sync
Start function.
2. Press the [START/STOP] button. The Style will begin playing.
Stopping a Music Style
There are two ways to stop Style playback:
Stopping a Style with an Ending
An Ending is usually referred to as a Coda. This is a
musical way of ending a song, some of the most
impressive examples can be found in classical
music. But also in pop music, a song usually does-
n't just stop. If that is what you are after, here is
what to do:
Press the [INTRO/ENDING] button while the Music Style is
running.
During the ending, the INTRO/ENDING] button's
indicator will be lit. When the Ending is over, the
indicator will go off.
Again, the length of the Ending depends on the
Music Style you select.
If you want to shorten/simplify the Ending:
Press the Fill In [TO ORIGINAL] button (indica-
tor starts flashing).
While the [TO ORIGINAL] button's indicator is
flashing, press the [START/STOP] button.
Stopping a Music Style immediately
Press the [START/STOP] button.
Alternatives for starting and ending
Music Style playback
Using a PAD button or a footswitch, you can fade
in (whereby the volume gradually increases) to the
start of a Style, or fade out (whereby the volume
gradually decreases) to the end of a Style. Please
refer to "Pad buttons: additional or frequently used
functions" on page 45 and "Pedal functions" on
page 46.
7.4. Style tempo
Every Style also contains a preset tempo value. If
you think the Style is too slow or too fast, here is
how to change it:
ty ote.
Co
Tempo
Pad
Press TEMPO [+] to increase the tempo and TEM-
PO [-] to decrease it.
The tempo value appears in the upper left part of
the display. Additionally, you can confirm the tem-
po and time signature by looking at the TEMPO
indicators.
25
m
Zz
9)
i
n
<
Advertisement
Table of Contents
