Get To Know Your Water Leak Sensor; Power Up; What Can I Do With My Wl Sensor; Install The Water Leak Sensor - Yolink YS7906-UC Installation & User Manual

Get to Know Your Water Leak
D
Sensor 4, Continued
LED & Beep Behaviors
Blinking Red Once, then
Green Once
Device Start-Up
Blinking Red And Green
Alternately
Restoring to Factory
Defaults
Blinking Green
Connecting to Cloud
Slow Blinking Green
Updating
Alert LED
Blinking Red Every 5
Seconds
Leak or Flooding
Warning

Power Up

E
Fast Blinking Green
Control-D2D Pairing in
Progress
Blinking Red Once
Device is connected to
the cloud and is
functioning normally
Fast Blinking Red
Control-D2D Unpairing
in Progress
Fast Blinking Red Every
30 Seconds
Batteries are Low;
Please Replace the
Batteries
Before you can use your Water
Leak Sensor 4, it must be turned
on. (Batteries have been
pre-installed.) Press the SET
button briefly, until the LED
flashes red then green (which
indicates it has turned on and
connected to a hub and the
cloud).
04