Control-D2D Device-To-Device Pairing - Yolink YS7906-UC Installation & User Manual

Control-D2D Device-to-Device
R
Pairing
YoLink Control-D2D is our unique device to
device control technology. Using YoLink
Control-D2D, YoLink devices can be controlled
without the Hub or an internet connection. (Use
of YoLink Control-D2D is optional; you can use
the Automation feature in the app OR use YoLink
Control, but YoLink Control-D2D offers the
connection.) One device controls another,
directly. A device that sends out commands is
called the controller. A device that receives the
commands is called the responder. Examples of
a controller are a Water Leak Sensor, while
examples of a responder are a Siren or the Smart
Motorized Valve.
The following instructions uses pairing your
Water Leak Sensor 4 with a YoLink SirenFob as
example.
1.
controller, Press and hold the SET button for
5-10 seconds until the LED quickly blinks green,
then, release the button.
a. SET Button
(5-10 seconds)
25