Wls 4Settings: Alexa - Yolink YS7906-UC Installation & User Manual

Water Leak Sensor 4 Settings:
P
Alexa
You can use the Water Leak Sensor 4 to trigger
Alexa routines. You must have the Alexa app
installed, the YoLink skill installed and
connected to your YoLink app account.
Alexa regards the Water Leak Sensor 4's four
buttons as motion sensors. Only the
short-press/click button behavior is recognized
by Alexa (you can still use the long-press
behavior for other things as Alexa ignores it) and
in fact, you can still assign a YoLink app function
to this button (although you are probably
unlikely to need to do this). It is not in the scope
of this user guide to cover set up of the Alexa
skill or to cover creating an Alexa routine, so the
1. Create a new routine in the Alexa app.
2. In the When This Happens
Smart Home.
3. Find your Water Leak Sensor 4. Each button is
Water Leak Sensor 4's name. Select the button
that you'd like to assign to this routine.
4. Tap the
settings available.
5. Tap Next.
Detected
section, select
button. Disregard the other
22