To Extend The Existing Wireless Network - TP-Link TL-WPA7817 User Manual

Chapter 2
Done!
Now enjoy the internet with the SSIDs and password printed on the label!
2 2

To Extend the Existing Wireless Network

I want to:
Extend the existing wireless network by adding a new powerline extender to the existing
powerline network.
For example, I already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top floor. So I bought a new powerline
extender to extend the wireless network.
How can I do that?
1 Plug the new powerline extender into a wall socket near one of the existing powerline
extender.
2 Check the new extender's Powerline LED
• If it is on, follow Step
• If it is off, follow Step
3 Join the new powerline extender into the existing powerline network by pairing two
powerline devices.
a . Press the Pair button on the existing powerline device for 1 second. The Power
LED starts blinking.
Note: If the Power LED does not blink, press the button again.
b . Within two minutes, press the Pair button on the new powerline extender for 1
second. The Power LED starts blinking. When the Powerline LED turns solid on,
the pairing process is complete.
P o
Existing Powerline Device
(For demonstrations only)
4 > A.
3 and Step 4 > B.
e
r l i n
w e
New Powerline Extender
(TL-WPA7817)
. Is it on?
Initial Use
10