To Extend The Existing Wireless Network - TP-Link Powerline TL-WPA7510 User Manual

Chapter 2
Done!
2 2

To Extend the Existing Wireless Network

I want to:
Blinking
10 00
M bp
s
Adatper
TL-PA7010
5. Relocate the new extender to the Wi-Fi "dead" zone. Use the
SSID (network name) and password on the provided Wi-Fi
Info Card to connect to the internet.
Note: A red Powerline LED indicates poor signal strength. Move the extender to
another location.
Now enjoy the internet with the SSID and password printed on
the Wi-Fi Info Card!
Extend the existing wireless network by adding a new powerline
extender into the existing powerline network.
For example, I already set up a wireless network using powerline
devices, but the wireless network is still not big enough to reach
within 2 minutes
10 00
M bp
s
Initial Use
Blinking
On
Extender
TL-WPA7510
8