Table of Contents
Advertisement
Chapter 3
Channel:
Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access
point.
Mode:
Select the desired mode for 2.4GHz Wi-Fi and 5GHz Wi-Fi.
2.4GHz Wi-Fi:
• 802.11n only: Select only if all of your wireless clients are 802.11n devices.
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Note: When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It
is strongly recommended that you select 802.11b/g/n mixed, so that all of 802.11b, 802.11g, and 802.11n
wireless clients can connect to the extender.
5GHz Wi-Fi:
• 802.11ac only: Select only if all of your wireless clients are 802.11ac devices.
• 802.11n/ac mixed: Select if you are using both 802.11n and 802.11ac wireless clients.
• 802.11a/n/ac mixed: Select if you are using a mix of 802.11a, 11ng, and 11ac wireless
clients.
• 802.11a/n/ac/ax mixed: Select if you are using a mix of 802.11a, 11ng, 11ac , and 11ax
wireless clients.
Channel Width:
Select the channel width. The default setting is Auto, which can adjust
the channel width for your clients automatically.
Transmit Power:
Select the level of transmit power. We recommend you choose
have the best signal strength.
3 5 2
Wireless Clients
Follow the steps below to view detailed information of all wireless clients connected to
the extender.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to
Wi-Fi
>
Clients
page.
Configuring via Web Management Interface
High
to
19
Advertisement
Table of Contents
