To Extend The Existing Wireless Network - TP-Link TL-WPA7517 User Manual

Chapter 2
5 Relocate the extender to the Wi-Fi "dead" zone. Use the SSID (network name) and
password on the label at the top of the extender.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
Done!
Now enjoy the internet!
2 2

To Extend the Existing Wireless Network

I want to:
Extend the existing wireless network by adding a new powerline extender to the existing
powerline network.
For example, I already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top floor. So I bought a new powerline
extender to extend the wireless network.
How can I do that?
1 Plug the new powerline extender into a wall socket near one of the existing powerline
extender.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
Initial Use
8