BWT COSMY THE BOT 100 Operating Instructions Manual
BWT COSMY THE BOT 100 Operating Instructions Manual

BWT COSMY THE BOT 100 Operating Instructions Manual

Robotic pool cleaners

Advertisement

Quick Links

100 / 150 / 200 / 250
EN | Operating instructions

Advertisement

Table of Contents
loading

Summary of Contents for BWT COSMY THE BOT 100

  • Page 1 100 / 150 / 200 / 250 EN | Operating instructions...
  • Page 2 Introduction Components System overview The robotic cleaner sweeps the pool floor and walls collecting dirt and Power debris in its filters. This user manual explains how to operate the robotic cleaner, including cleaning, maintenance and storage procedures. supply Power Note: This manual reviews several different models with variations in cable components.
  • Page 3: Operation

    Operation Placement of the Power Supply Please use as much cable as Place the power supply at least 3.6 meters / 11.8 feet from the needed. Leave the remaining cable out of the pool. pool and at least 12 cm above ground. CAUTION: The power supply is not water resistant;...
  • Page 4: Power Supply

    Operation Power Supply Starting the robotic cleaner Connect the power supply to the wall socket. The on/off button will lit and the robotic cleaner will start its cleaning program. If the power supply is already connected to the wall socket, the on/off button will flash to indicate that the robotic cleaner is in standby mode.
  • Page 5: Maintenance And Storage

    Maintenance and Storage Cleaning the filters The two filters must be cleaned after each cleaning cycle. Press the buton to release the filter and pull it out of the cleaner. Open the filter case. Spray water on the outer sides of the filter and then spray water towards the inner side of the filter to clean all the dirt and debris.
  • Page 6: Troubleshooting

    Troubleshooting CLEANER DOES NOT TURN ON THE CLEANER DOES NOT CLIMB WALLS Filters are dirty: (1) Remove and clean the filters. (2) There is no electricity in the wall socket: Restart the robot and try again. (1) Verify that your robotic cleaner is not a floor-only (1) Disconnect cleaner from the power and control unit.
  • Page 7: Warranty

    Use of the product in anything other than private, residential pools. Furthermore, BWT will not be liable under any circumstances and neither the legal warranty nor the sales warranty will apply, for any damages that may or will occur to any pool, including pool's plaster or pool's vinyl liner, by reason of the use and/or operation of the BWT pool cleaner.
  • Page 8 Download BWT Home App for COSMY THE BOT 200 / 250...

This manual is also suitable for:

Cosmy the bot 150Cosmy the bot 200Cosmy the bot 250

Table of Contents