Craftsman 247.889701 Operator's Manual page 10

7, Insertthe hexend of chute rod intothe inputshaftbelowjoystick
on handlepanel,Make sureto line up the hole in the hexend of
chute rodwith the arrowon the inputshaft.See Figure7.
NOTE:The chute rodwill fit snugglyintothe inputshaft. Supportthe
rear of the dashpanelwith one hand whileinsertingthe chute rodwith
yourotherhand to ensurethe chute rod is insertedall the way intothe
inputshaft.
8. Now pushthe roundend of chute rod back towardsthe handle
paneluntil the hole in the rod lines up with the hole in the chute
controlinputclosestto the chute controlhead.Insertthecotter
pin.See Figure8.
NOTE:The secondhole is usedto achievefurtherengagement o f
the hexend of chute rod intothe input shaftif requiredand can be
usedlaterfor adjustmentif the chutedoes notfully rotate.Referto the
Service& Maintenancesectionfor ChuteControlRodadjustments.
9. Finishsecuringchutecontrol headto chute supportbracketwith
wingnut, and clevis pin and bow-tiecotter pin removedearlier.
See Figure9.
//
Figure8
x
\
\
y..................
Figure7
Figure9
10