Table of Contents
Advertisement
Changing the basic settings
Prerequisite: The oven must be switched off.
Have a look at the table containing the basic settings so that
you know what the numbers mean.
Example in the picture: changing the cooling fan run-on time
basic setting from medium to short.
Press and hold the
button for approx. 4 seconds until
±
1.
appears for the first basic setting and
RQ
3
0
FOHDQ
RII
Automatic switch-off
Your oven has an automatic switch-off function. It is activated if
no cooking time is set and the settings have not been changed
for a long time. The point at which this occurs depends on the
temperature or grill setting that has been set.
Switch-off activated
appears in the display. Operation is interrupted.
"‰
Cleaning system
The cleaning system regenerates the self-cleaning surfaces in
the cooking compartment.
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and disintegrates splashes from baking
and roasting while the oven is in operation. If these self-
cleaning surfaces no longer clean themselves adequately, they
can be regenerated with the cleaning system.
Cleaning levels
You can choose from three cleaning levels.
Level
Degree of cleaning
1
gentle
2
moderate
3
intensive
14
™‚
for the preset value.
ƒ
VWDUW
ƒ&NJ
VWRS
Cooking time
approx. 45 minutes
approx. 1 hour
approx. 1 hour, 15 minutes
Press the
±
button repeatedly until the required basic setting
2.
appears.
RQ
3
0
FOHDQ
RII
Use the rotary selector to change the value of the basic
3.
setting.
RQ
3
0
FOHDQ
RII
You can now change other basic settings, as described in
4.
points 2 and 3.
Press and hold the
±
button until the display disappears. This
5.
takes about four seconds. All changes are saved.
Cancelling
Press the
‡
button. The changes are not applied.
Press any button to make the display message go out. You can
make new settings.
Note: If a cooking time is set, the oven stops heating once the
cooking time has elapsed. The automatic switch-off function is
not necessary.
Before cleaning
Remove accessories and cookware from the cooking
compartment.
Cleaning the cooking compartment floor
Before you set the cleaning system, clean the surfaces in the
cooking compartment that are not self-cleaning. Otherwise,
stains will develop that it is not possible to remove.
Use a dish cloth and hot soapy water or a vinegar solution. If
there are heavy deposits of dirt, use a stainless steel scouring
pad or oven cleaner. Only use when the cooking compartment
is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.
VWDUW
ƒ&NJ
VWRS
VWDUW
ƒ&NJ
VWRS
Advertisement
Table of Contents
