High tech health Transcend TRS-2 Owner's Manual page 17

8. BENCH TOP
It is easiest to do this by aligning one side to a side wall and then lowering into place.
OPTIONAL: You can add 2 to 4 of the longer screws to the holes at the sides or back of
the bench top to secure it in place.
9. BACKREST
Attach the backrest using a wood peg at each corner. The part of the backrest that sticks
further into the cabin should be the lower part. You will need to hold it fairly level while
attaching the two top pegs. Choose the location of the top pegs to set the backrest height,
and then position of the bottom two pegs to set the inclination.
© 2024 High Tech Health International, Inc.
16
MTRS2-20240322A