High tech health Transcend TRS-2 Owner's Manual page 10

3. BACK PANEL
a) Before placing the back panel onto the floor panel, you will need to remove the white
foam that covers each of the 6 latches on it.
Below is a picture of the latch. It has a lever and a locking spring:
The locking spring holds the latch closed. To open the latch, place one finger on the
lever and one finger on the locking spring. Then as you squeeze your fingers together,
the latch will open.
b) Place the back panel onto the floor panel. The end with the cables is at the bottom.
Make sure that there is equal space on the left and right side of the back panel for later
when you add the side panels.
© 2024 High Tech Health International, Inc.
Lever Locking spring
9
MTRS2-20240322A