High tech health Transcend TRS-2 Owner's Manual

Smart sauna

Advertisement

Quick Links

Transcend
®
SMART SAUNA
Model TRS-2
OWNER'S MANUAL
Two Person Sauna

Advertisement

Table of Contents
loading

Summary of Contents for High tech health Transcend TRS-2

  • Page 1 Transcend ® SMART SAUNA Model TRS-2 OWNER’S MANUAL Two Person Sauna...
  • Page 2: Table Of Contents

    TROUBLESHOOTING GUIDE ....................38 WARRANTY ........................... 45 CLEANING & MAINTENANCE ....................46 STORAGE ..........................46 SPECIFICATIONS ........................47 CERTIFICATIONS ........................48 CORRECT DISPOSAL OF THIS PRODUCT ................. 48 HIGH TECH HEALTH CUSTOMER SERVICE ............... 48 © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 3: Safety Instructions / Warnings

    15. Do not use the unit during an electrical storm, as there is a remote risk of shock. 16. Altering or tampering with any electrical connections on the power supply will void the manufacturer’s warranty. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 4 30. Do not directly touch the heater with hands or body. 31. No sauna session should exceed one hour. 32. It is not recommended that sauna temperature exceed 150°F (65 °C) unless approved by your doctor. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 5: Important Safeguards

    16. Safety Check – Upon completion of any service or repairs to this product by a service technician, ask the service technician to perform safety checks to determine that the product is in proper operating condition. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 6: Contents Of Shipping Boxes

    Box 3 of 4: • Backrest • Bench Top • Bench Heater • Small Parts Box • Roof Panel • Floor Panel Box 4 of 4: • Right Front Heater • Left Front Heater © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 7: Small Parts List

    • Silicone seal for the left side glass • 4 wood pegs for the backrest • 1/8” phono audio cable • 4 longer screws to hold down the bench • 2 silver shorter screws for the side glass brackets © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 8: Read Before Installation

    If the surface is not level you may need to shim the bottom panel to make it level.) The side with the metal box goes in back. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 9 Feed the power cord coming from the metal control box at the floor panel through the hole in the floor panel. Now is a great time to confirm that the power cord will reach your intended power outlet (do not plug in the sauna yet): © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 10 Place the back panel onto the floor panel. The end with the cables is at the bottom. Make sure that there is equal space on the left and right side of the back panel for later when you add the side panels. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 11 Connect the two cables coming out of the floor panel in front of the control box to the control box (match ‘A’ on the cable to ‘A’ as marked on the back of the control box): © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 12 Connect the barrel cable between the back panel and the floor panel. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 13 Note that 2 of the cables are similar, but one is black and the other is white. The black one connects to the receptacle labeled “RT”. The white one connects to the receptacle labeled “LIGHT”. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 14 6. LEFT SIDE PANEL Attach the left side panel just like you attached the right side panel. Close the 3 latches on the back panel to secure the left side panel in place. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 15 7. BENCH HEATER a) Slide the bench heater down into place. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 16 Attach the cable from the back of the bench heater, labeled “B” to the top of the control box at a receptacle labeled “B”. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 17 You will need to hold it fairly level while attaching the two top pegs. Choose the location of the top pegs to set the backrest height, and then position of the bottom two pegs to set the inclination. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 18 Place it on the left side of the left front window (the side that has the bracket). Start at the top, leaving a space of about ¼ inch (about half a centimeter) and work your way down: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 19 There are 2 “L” brackets that secure the glass to the left side panel. Use the 2 shorter silver screws – be careful not to over tighten the screws. You might have to lift the glass a little to attach the brackets. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 20 Attach the cable from the heater to the cable from the floor panel: Push the excess cable into the floor so that it will not get in the way when the heater is installed. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 21 Use these two hooks to secure the heater to the left side panel. The easiest way to accomplish this is to align the heater against the left side panel about an inch or two above its final position and then lower it into place: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 22 Move cables on the floor out of the way. TIP: It is easier to move the front panel to the sauna by opening the door all the way and carrying it this way: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 23 With the glass door still folded over the wood side of the front panel, place the bottom of the wood side of the front panel into the floor panel: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 24 You can then complete the connection by tapping down the connection mechanism with a hammer -- have a second person hold the front wall panel while you do this to prevent the front panel from falling. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 25 (OPTIONAL: Instead of adding the screw, wait and let the addition of the roof panel lock the connection mechanism in place. WARNING: If you do not add the screw, the front panel may not be 100% securely held in place until you add the roof panel.) © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 26 Then add the inside chrome button that holds the top of the outside door handle to the glass. You can now snug these up but don’t over tighten. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 27 The bottom right one in the picture below says “FAN DC 12V”. We will be connecting the wires labeled “12V” to that connection. b) Add the roof panel -- be sure the speakers on the roof panel are oriented toward the front of the sauna. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 28 The remaining cables from the floor will pass through the floor side of the front heater out it’s back side to connect with cables from the front panel. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 29 Connect the cables labeled “A” together, and connect the cables labeled “B” together. Connect the barrel cables together also through the front right heater. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 30 The easiest way to accomplish this is to align the heater against the side panel about an inch or two above its final position and then lower it into place: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 31 Inside the small door at the front of the top of the roof you will connect one side of the audio cable to the receptacle coming from the front panel, and the other side into the audio amplifier. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 32 Two of the cables are the same size with 2 possible locations to connect them. The cable labeled “12V” will connect to the receptacle that is closest to the outside corner of the sauna. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 33 18. DOOR MAGNETS Retrieve the 2 door magnets from the long thin box: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 34 Push the magnet onto the door starting at the top and making your way down. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 35 Now you can plug the power cord for your sauna into the wall and you are done assembling your new sauna! Before using your sauna for the first time, wipe down the inside of the sauna with a damp cloth to remove sawdust. Congratulations on completing the installation! © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 36: Using Your Sauna

    Stretch your arms and legs, massage your neck, massage your feet, etc. 6. At the first sign of cold or flu, increasing your sauna sessions may be beneficial in boosting your immune system and decreasing the reproductive rate of the viruses. Do © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 37 Still others find sauna sessions energizing and find using them first thing in the morning to be most beneficial. Experiment to find out what is best for you. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 38: Operating Instructions

    1. Simply touch the screen. TURNING OFF YOUR SAUNA 1. Just get out of the sauna. It will turn itself off. ALL HELP IN USING YOUR SAUNA IS AVAILABLE FROM THE SCREEN © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 39: Troubleshooting Guide

    First, check the connection at the control box under the bench. The black 2-pin skinny connector should not be swapped with the transparent 2-pin skinny connector. Make sure those connectors are fully seated in their respective sockets, particularly the black one. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 40 Please note that the “FAN” and temperature sensor connectors are the exact same size and could be accidentally swapped, causing the malfunction. It should look similar to this: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 41 If it is, then make sure you have connected the barrel cables together underneath the right front heater (the heater below the screen). To remove a front heater, lift it directly up. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 42 PROBLEM: You plug in your sauna and see this screen (noPsMessages): SOLUTION: First, check to make sure this connection is firmly seated at the control box under the bench: © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 43 If that connection is fine, then make sure you have connected the cable marked “A” with the other cable marked “A” underneath the right front heater (the heater below the screen). To remove a front heater, lift it directly up. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 44 PROBLEM: You see a message that says “There seems to be a communication issue.” with either “(psErrorCount)” or “(initialUSBSetup)”. SOLUTION: Please call High Tech Health Customer Support (see the end of this manual for ways to contact us). © 2024 High Tech Health International, Inc.
  • Page 45 To remove the front heaters, lift them directly up. © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 46: Warranty

    WARRANTY Your High Tech Health Transcend® Smart Sauna is warranted to be free from manufacturing defects in material and workmanship: Residential Use: 1) Heaters: 8 years from date of purchase 2) Electronics (not related to the stereo or display): 8 years from date of purchase...
  • Page 47: Cleaning & Maintenance

    4. Scratches and stains on the sauna can be removed by simply applying a fine grade sandpaper to the affected area. STORAGE Do not place or store product in a moist environment or in direct sunlight © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 48: Specifications

    Serial Number: ______________________________ Date of Purchase: ____________________________ Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifiers: High Tech Health® Transcend® TR-2 Responsible Party – U.S. Contact Information: High Tech Health International, Inc. 2770 Arapahoe Rd. Ste. 132-639...
  • Page 49: Certifications

    HIGH TECH HEALTH CUSTOMER SERVICE In the United States: 1-888-878-8300 Outside of the United States: +1 303-413-8500 Email: cs@hightechhealth.com Web: https://www.hightechhealth.com © 2024 High Tech Health International, Inc. MTRS2-20240322A...
  • Page 50 High Tech Health International, Inc. +1.303.413.8500 Toll Free in the United States: 800.794.5355 (Main) 888.878.8300 (Customer Service) www.HighTechHealth.com...

Table of Contents