Table of Contents
Advertisement
Temperature control
When the refrigerator leaves the factory, set temperature of the refrigerator room,
left and right Prime Fresh Room, wide variable case, and freezer are respectively
4°C, 0°C, 0°C -3°C, -20°C. If you want to change the cooling capacity, you can
adjust the temperature setting.
The temperature in the refrigerator will vary depending on the ambient temperature,
setting status, use conditions and the amount of food.
Due to different test methods and tools, when the ambient temperature changes,
the compressor runs or stops, and the door is opened or closed, the indoor
temperature will fluctuate, causing the temperature in refrigerator to deviate slightly
from the set temperature.
Unlock the control panel
Touch the control panel to light up the lamp, temperature display zone shall
sequentially show temperature of refrigerator room, wide variable case, freezer room,
Prime Fresh Room and such room icon shall be highlighted and nanoe
also lights up.
Press the unlock button for 3 seconds, the lock icon goes out after the buzzer sound,
and the control panel is unlocked. Temperature display zone flashes to display the
set temperature of the refrigerator room, while the refrigerator room display icon is
highlighted. Lights for quick freezing mode, holiday mode and ECONAVI mode turn to
dim.
Setting refrigerator room temperature
After unlocking, corresponding refrigerator room display icon lights up when the
refrigerator room is selected and the temperature display zone flashes to display the
set temperature.
Press temperature setting button to set the refrigerator room temperature. Each time
you press the temperature setting button, the temperature drops by 1˚C. 10 seconds
after temperature and mode are set, temperature display zone stops flashing, lock
icon lights up after buzzer sound and the control panel is locked.
Temperature setting range for refrigerator room is 7˚C~1˚C, set temperature is "7°C"
— "6°C" — "5°C" — "4°C" — "3°C" — "2°C" —"1°C" respectively.
Set temperature for left and right Prime Fresh Room
After unlocking, corresponding room display icon lights up when the Prime Fresh
Room is selected and the temperature display zone flashes to display the set
temperature.
Press temperature setting button to set the Prime Fresh Room temperature. Each
time you press the temperature setting button, the temperature drops by 1˚C. 10
seconds after temperature and mode are set, temperature display zone stops
flashing, lock icon lights up after buzzer sound and the control panel is locked.
The set temperature range of the Prime Fresh room is 4˚C ~ -3˚C, set temperature is
"4°C" —"3°C" — "2°C" — "1°C" — "0°C" — "-1°C" — "-2°C" — "-3°C" respectively.
X mode icon
TM
Advertisement
Table of Contents
