Table of Contents
Advertisement
Name and function of control panel
Starting use
When the refrigerator is powered on for the first time, the control panel lights up,
temperature display zone shows temperature for refrigerator room of 8°C, wide
variable case of 8°C, freezer room of -12°C, left and right Prime Fresh Room of
8°C respectively, also corresponding display icons are fully bright and nanoe
icon lights up until temperature display zone stops flashing for about 3-4 hours.
(At this time, the ambient temperature is about 32°C, do not store food, close the
door until the refrigerator operates normally)
In the summer, when the ambient temperature is high, temperature display zone
will not show actual temperature.
Note
Under normal conditions, the control panel light is off. The control panel light lights up
when you push the button or open refrigerator door.
In hot weather such as summer, the indoor temperature may rise due to uncooled food or
continuously opening and closing of the door, and the displayed value may be higher than
the set temperature. Therefore, please reduce the number of door openings appropriately.
When the ambient temperature is low, the temperature displayed in the refrigerator room
is the actual one after the power is turned on, and the temperature display does not flash
at this time; the temperature displayed in the freezer room is -12°C, and the temperature
display flashes at this time.
Control panel
A. Cooling level standard
Indicates the refrigerator cooling level standard
(compressor speed)
B. Room display icon: Corresponding icon lights up when
you select a specific room. Room selection button: To
select refrigerator room, wide variable case, freezer
room and Prime Fresh Room.
C. Temperature display zone: To display temperature for
refrigerator room, wide variable case, freezer room and
Prime Fresh Room.
Temperature setting button: To adjust temperature for
refrigerator room, wide variable case, freezer room and
Prime Fresh Room.
D. Quick freezing mode icon: Display current status of
Quick freezing mode. Quick freezing mode button:
Setting or canceling Quick freezing mode.
E. ECONAVI mode icon: Display current status of
ECONAVI mode.
ECONAVI mode button: Setting or canceling ECONAVI
mode.
F. Holiday mode icon: Display current status of holiday
mode. Holiday mode button: Setting or canceling
holiday mode.
G. nanoe
X mode icon: Display current status of nanoe
TM
mode.
nanoe
X mode button: Setting or canceling nanoe
TM
mode.
H. Lock icon: Display if the control panel is locked or not.
Unlock button: Press and hold for 3 seconds to unlock
the control panel.
I. ECONAVI indicator: Display current status of ECONAVI
mode.
X
TM
X
TM
X
TM
Advertisement
Table of Contents
