Temperature Control - Panasonic NR-BW530H Operating Instructions Manual

Temperature Control

● Default setting temperature for Fridge compartment is 4 °C, Prime Fresh case is -3 °C and
Freezer compartment is -20 °C. The temperature setting for each compartment can be
adjusted.
● The temperature setting range of the Fridge compartment is 7 °C ~ 1 °C, of the Prime
Fresh case is 4 °C ~ -5 °C (the temperature for soft freezing is -1 °C ~ -5 °C, and the
temperature to use the Prime Fresh case as the Fridge compartment is 4 °C ~ 0 °C), of the
Freezer compartment is -15 °C ~ -23 °C.
● The temperature inside the refrigerator will vary depending on the ambient temperature,
installation status, usage conditions and amount of food.
● Due to different testing methods and tools, the actual temperature may differ from the
displayed temperature.
● This refrigerator is equipped with a processor to control the temperature inside the
refrigerator. When the ambient temperature changes, the compressor runs or stops, the
doors are opened or closed, the temperature inside the refrigerator and the temperature
setting will have a slight difference.
„ Temperature setting instructions
1. Display the current temperature
Press the following icons to display the current temperature of these compartments: Fridge
compartment, Prime Fresh case, and Freezer compartment. The LED indicates position and
the LED indicates temperature of the compartment will light on when selected.
Icon
2. Temperature setting
After pressing the icon of compartment (Fridge, Prime Fresh, Freezer) to display the current
temperature, press again to start the temperature setting process. Then, LED indicates
position of the compartment and LED indicates temperature of the compartment will flash.
Continue to press the icon of that compartment to select the desired temperature level. Each
time the button is pressed, the temperature will increase by 1 °C.
3. Complete temperature setting
After completing the temperature setting, press another button to finish and save the setting
that you have just made. Or if no other button is pressed within 10 seconds, the Operation
Panel will save the setting and return to stand by mode.
Compartment
Fridge compartment
Prime Fresh case
Freezer compartment
LED indicates
position of the
compartment
LED indicates
temperature of the
compartment
25