Temperature Control; Temperature Control (Fine Adjustment Mode) - Panasonic NR-TZ601B Operating Instructions Manual

Temperature control

The temperature can be adjusted for Min - Max levels. Press "Freezer" to adjust temperature
in Freezer room and press "Fridge" to adjust temperature in Fridge room.
Temperature setting
Max
Med
Min
The refrigerator is specially designed for approriate use, which can adjust the
temperature
level to detailed 9 levels with the following details.
1 Set LED display to the "Min" position by press the [Fridge] button.
2 Press and hold the [Fridge] button for about 10 seconds until the LED display returns
to the "Min" position.
3 Use the [Fridge] button to set the required temperature mode, where level 1 is the minimum
Operate above 1 ~ 3 steps with pressing "Freezer" button instead of "Fridge" button.
LED Display table
Cooling Level
Levels
LED Display
Lighting
Repeat steps 1 and 2, then the refrigerator returns to normal operation mode.
The temperature control can vary depending on the environment and amount
Remark
of food stored in the refrigerator.
Button [Fridge]
(Fridge room)
Lower than "Med" by approx.
2 °C ~ 3 °C
Approximately 1 °C ~ 6 °C
Higher than "Med" by approx.
2 °C ~ 3 °C
Minimum
1 2 3
Blinking
(Freezer room)
Lower than "Med" by approx.
2 °C ~ 3 °C
Approximately -23 °C ~ -17 °C
Higher than "Med" by approx.
2 °C ~ 3 °C
4 5 6
Not lighting
[Freezer]
Maximum
7 8