Table of Contents
Advertisement
Changing the programme sequence
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been successfully
started. This prevents the machine be-
ing operated unintentionally, e.g. by chil-
dren.
If the washing machine is switched off
during active programme operation,
the standby function does not switch
the washing machine off completely
after 15 minutes. Safety functions con-
tinue to be active because there may
still be water inside the drum.
Interrupting a programme
Turn the programme selector to the
position.
The washing machine switches off.
To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.
Cancel?
Touch the sensor control.
The following will appear in the display:
Cancel?
Confirm with the OK sensor control.
Tip: If
Cannot be changed
the display, the programme selector is in
the incorrect position.
54
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
Turn the programme selector to the
Turn the programme selector to the
The following will appear in the display:
Touch the OK sensor control.
The suds are pumped away. The follow-
ing will appear in the display:
Wait until the symbol in the display
Pull open the door.
Remove the laundry.
Yes
OK
No
OK
appears in
position.
Cottons programme.
Cancel?
Prog. cancelled
goes out and the door unlocks.
Yes
OK
OK
Advertisement
Table of Contents
