Table of Contents
Advertisement
Omitting the final spin (Rinse
hold)
Set the spin speed to (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps to prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin cycle
The display shows
ately with the ideal spin speed.
Touch the Start/Add laundry sensor
control to start the final spin.
Ending a programme without a spin
cycle
Reduce the spin speed to
Touch the flashing Start/Add laundry
sensor control.
altern-
Rinse hold
.
0
Interim spin
There is a spin cycle after the main wash
and between the rinses. A reduction in
the final spin speed will also reduce the
interim spin speed as appropriate.
Omitting the interim-spin and
the final spin
Before the start of the wash pro-
gramme, reduce the spin speed to
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Spinning
.
0
41
Advertisement
Table of Contents
