Shutting Down Your Product; Replacing The Illumination Lamp - Indesit IT60 732 S FR User Manual

The water, which arises as a result of melt-
ing, flows into evaporating container avail-
able on the back of your refrigerator and
evaporates spontaneously there.
The water flows into evaporating container
by the help of discharge pipe available in
the internal rear wall. Check whether the
discharge pipe is not obstructed or not at
certain intervals and if there is an obstruc-
tion, unblock it.
In order to ensure that frozen food
are not spoiled, automatic melting
is not performed in the freezer
compartment. The snow develop-
ing in the freezer compartment,
should be melted once every six
months.
First of all, you should stop operating your
refrigerator for snow melting process. Un-
plug your appliance in order to perform
this.
Empty the freezer compartment. Keep your
frozen food in a cool place during snow
melting process.
You should not keep the door of the freezer
compartment closed during melting pro-
cess.
When the developing snow is melted com-
pletely, remove the water, which is accumu-
lated in the freezer compartment, with an
absorber cloth or sponge and dry it.
Plug in your appliance again to operate it.
Never use materials such as
candles, gas lamps and heaters in
order to accelerate the melting pro-
cess in your refrigerator.
Operate your refrigerator in an
empty state and with its doors
closed for 2 hours before putting
your food back in the freezer com-
partment.

8.2 Shutting Down Your Product

If your thermostat has a "0" position;
- Your product will stop working when its
thermostat knob is switched to "0" position.
If you do not turn the knob towards "1" or
other positions again, your product will not
start to function again.
If your thermostat has a "min" position;
- In order to shut down your product, take
the power plug out of the socket.

8.3 Replacing the Illumination Lamp

Call the Authorized Service when the Bulb/
LED used for lighting in your refrigerator
will be replaced.
EN / 18
EN
FR