Nova 8205-R How To Assemble

IMPORTANT: Screws MUST be attached in the exact order stated in # 1 and # 2 of Assembly Instructions
ASSEMBLE YOUR
TOILET SAFETY SUPPORT FRAME
Item # 8205-R
Capacity not to exceed 300 lb
a.
1.
3.
1
Stand the side frame upright, and place
one of the U-shaped support beams
vertically against the base, curve facing
downward. Insert tightening knobs in the
order numbered 1 through 4.
Turn enough to hold the support beam in
place. DO NOT fully tighten.
Repeat for other side frame.
3
At this point, fully tighten all
eight (8) tightening knobs. Frame
should now be able to stand freely.
HOW TO
a. (1) Set of side frames
b. (2) U-shaped support beams
IMPORTANT:
Screws MUST
be attached
2.
in the exact
order stated
in # 1 and # 2
4.
of Assembly
Instructions
WHAT'S IN THE BOX
c. (1) Magazine rack
d. (8) Tightening knobs
b.
6.
2
Turn the unit around so it is
facing you then attach the second
U-shaped support beam with
tightening knobs to the side frame in
the horizontal position
4
Hang magazine rack on the desired
side.
NO tools required.
Quick assembly.
Easy to follow
step-by-step
instructions
c.
8.
7.
5.
*Revised August 24, 2021
d.