•
Lock:
Key: To disable all function keys. Push the 5-way button down for
*
over 5 seconds to cancel the key lock function.
Preset Setting: To lock all parameters and disable (gray out)
*
ProArt Palette.
•
Power Indicator: Turns the power LED indicator on/off.
•
Ambient Effect: Configures the ambient effect settings.
Light Effect: Adjusts the brightness level adaptively.
*
To activate Light Effect function, you need to do the following: set Blue Light
Filter to 0 and Set Proximity Sensor to Off.
Adaptive Color: Adjusts the color temperature adaptively.
*
To activate Adaptive Color function, you need to do the following: set Blue Light
Filter to 0.
This function will be disabled if the HDR function is enabled and the ProArt
Preset setting is set to HDR_PQ DCI, HDR_PQ Rec2020, HDR_HLG Rec2100,
HDR_HLG DCI, or HDR_Dolby Vision.
•
Proximity Sensor: If the function is enabled and the system does not
detect the presence of object within 30cm-90cm over the preset time, the
system will automatically decrease brightness periodically.
•
Recovery time would be within 2 seconds.
•
Detectable ability and distance are different according to the object and
environment.
•
Please avoid placing objects in front of the sensor (between 30cm and
90cm), as it will cause the function of the sensor to fail (misjudging that
someone is ahead).
•
Information: Shows the monitor information.
•
All Reset: "Yes" allows you to restore the default settings.
ASUS PA32UCXR Series LCD Monitor
3-17