Health O Meter Professional 349KLX Manual page 72

OPERATING INSTRUCTIONS (CONT)
Auto-Off Function
As an energy saving feature, the scale automatically powers off after 2 minutes of inactivity.
This function is enabled by default.
Disable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display followed by "A-OF" and then "0.0" lb appears.
4. Release the lb./kg and ON button.
5. Auto-off is now disabled, and the scale will remain on until the scale is manually powered
off.
Enable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display, followed by "0.0" lb.
4. Release the lb./kg and ON button.
5. Auto-off is now enabled.
Changing the Weight Measuring Unit
1. Press the ON button to power the scale on.
2. Wait for "0.0" LB or "0.0" KG to appear on the display.
3. Press the lb./kg button to toggle to the desired weight measuring unit.
Locking the Weight Measuring Unit
The weight measuring unit can be locked to only measure in KG or LB. Follow the procedures
below to lock the weight measuring unit.
KG Lock Instructions
1. Press the ON button to turn the scale on. Wait for "0.0" to appear on the display.
2. Press and hold the lb./kg button so that KG icon is displayed and continue holding the
lb./kg button for approximately 10 seconds.
3. When the KG icon flashes, release the lb./kg button. The KG weight measuring unit is now
locked and will remain locked even if the scale is turned off.
LB Lock Instructions
Note: To lock in LB weight mode, you must follow the instructions above to lock in KG weight
mode first.
1. Once the scale is locked in KG mode, press and hold the lb./kg button for approximately 10
seconds until the LB icon flashes.
2. When the LB icon flashes, release the lb./kg button. The LB weight measuring unit is now
locked and will remain locked even if the scale is turned off.
Unlocking the Weight Measuring Unit
Note: If your scale is locked in KG mode, you must first follow the instructions above to lock into
LB mode, and then begin the disabling instructions below.
1. Press the ON button to turn the scale on. Wait for "0.0" to appear on the display.
2. Press and hold the lb./kg button until LB and KG icons both flash. When LB and KG are
flashing, release the lb./kg button. The weight measuring unit is now unlocked; pressing the
lb./kg button will allow user to toggle between LB and KG.
UM349KLX REV20191007
72
Back to Home Page