Health O Meter Professional 349KLX Manual page 178

QUICK START / OPERATING INSTRUCTIONS (CONT)
Auto-Off Function
As an energy saving feature, the scale automatically powers off after 2 minutes of inactivity.
This function is enabled by default.
Note: Ensure cable is attached to the display assembly RJ jack, and make sure there is no
object on the scale platform.
Disable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display followed by "A-OF" and then "0.0" lb appears.
4. Release the lb./kg and ON button.
5. Auto-off is now disabled, and the scale will remain on until the scale is manually
powered off.
Enable Auto-Off
1. While the scale is powered off, press and hold the lb./kg button.
2. While holding the lb./kg button, press the ON button to power the scale on.
3. "349" will briefly appear on the display, followed by "0.0" lb.
4. Release the lb./kg and ON button.
5. Auto-off is now enabled.
Units of weight:
1. Press the ON button to power the scale on.
2. Wait for "0.0" lb to appear on the display.
3. Press and release the lb./kg button to operate the scale in the selected mode. The
selected units of measure will appear on the right side of display.
4. Repeat step 3 to toggle the weighing mode to a different unit of measure.
KG and LB Lock Out
Note:
The default weighing mode for this scale can be changed from LB/KG to KG only or LB
only.
178
Back to Home Page