Health O Meter Professional 349KLX Manual page 120

POWERING THE SCALE
Powering the Scale
1. If powering the scale via the optional AC adapter, plug the adapter into the display assembly
and into a power source.
2. For battery operation, see Battery Installation below.
Battery Installation
1. Unplug the AC adapter from the power source.
2. Use a Phillips head screwdriver to remove the battery cover on the back of the display
assembly.
3. Replace or install fresh batteries. Note the orientation that is shown and ensure the batteries
are placed in the proper directon.
Note: ®
Health o meter
130°F (54°C) operation. Do not use zinc-carbon batteries.
4. Re-attach the battery cover to the display assembly.
Warning: If the scale will not be used for some time, remove the batteries to avoid a
safety hazard. Disposal of batteries must be performed in accordance with the prevailing
national, regional or local regulations that apply to
UM349KLX REV20171212
Note orientation
Professional recommends using alkaline or lithium batteries, rated for
120
Power Adapter
Port
Battery Cover
you.
Back to Home Page