Light Modes - ION TOTAL PA FREEDOM User Manual

Light Modes

Press the Lights button to toggle between ten modes for the LEDs on Total PA™ Freedom.
Note: For the best lighting e ect, you may need to increase the volume of your connected
device or input source.
• Crazy Rainbow Beat Sync: A rainbow of colors will spin around the perimeter. The woofer
lights will match the bottom middle LED. The higher the music volume, the faster the speed
of the spinning rainbow pattern.
• Spinning Stars: The LEDs will move around the perimeter and fade through the color
spectrum in a shooting star pattern. The woofer lights will pulse with the same color when
the perimeter LEDs reach the middle.
• Beat Sync Star: A long shooting star pattern will circle the perimeter changing speed as
the song volume changes. The woofer lights will pulse to the beat of the song. The higher
the music volume, the faster the speed of the shooting star pattern.
• Bouncing Stars: Light streaks will flow down the sides. When they meet at the middle
bottom part of the speaker, they will bounce back up to the top in the next color in the
spectrum and flow downward again. Woofer lights will pulse with the new color when the
light streaks bounce in the middle areas, repeating down the color spectrum.
• Starlight Effect – Beat Sync: Random LEDs will flash a random color and slowly fade away
according to the beat of the song. More LEDs will be illuminated based on the song volume.
• Firepit – Beat Sync: The lights will flicker red, yellow, and orange and the side lights rise up
and down based on the volume of the music.
• Static Color: All LEDs will stay the same color (the color can be adjusted from the ION
Sound Control ™ app). By default the color is blue. There are the 15 colors that can be selected
from the ION Sound Control™ app.
• Diagonal Waves – Beat Sync: Three waves of one color will pass by and after they have
gone from the top left side to the bottom right side new waves in the next color with appear.
Waves will speed up or slow based on music volume. Woofer lights will pulse to the low
frequency's beat.
• Two-Tone Cycle: One side of the LEDs (including 2 from the prong light and 1 from the
edge glow light) will show one color while the other side of the LED will light up with a
nearby color on the full color spectrum.
• Random: The side LEDs cycle through the full color spectrum randomly, changing every 5-
7 seconds.
• Off: All LEDs are o .
ION Audio Total PA™ Freedom User Guide
PRESS TO CYCLE
15