Operation; Installing Batteries Into The Wireless Mic; Using The Wireless Mic - ION TOTAL PA FREEDOM User Manual

OPERATION

Installing Batteries Into the Wireless Mic

a. Remove battery compartment cover by turning it
clockwise.
b. Install two fresh AA batteries (not included) in the
orientation indicated in the compartment.
c. Press the reset switch inside the compartment for 3
seconds to reset the mic's connection to the speaker.
d. Reattach battery cover by turning it counterclockwise.

Using the Wireless Mic

1. Power on the wireless microphone with the mic's on/o switch.
2. Use the MIC 1 Wireless Mic Volume on the speaker or + / - controls on the microphone to
adjust volume.
Note: If the wireless microphone becomes disconnected from the speaker, press the reset
switch inside the battery compartment for 3 seconds to reset the mic's connection to the
speaker.
ION Audio Total PA™ Freedom User Guide
c
b b
a d
11