ION TOTAL PA FREEDOM User Manual page 19

If this does not work, and you have connected to Total PA™ Freedom before, find Total
PA™ Freedom in the list of available or previously connected devices in your audio device's
Bluetooth menu, tap the "gear" or "i" icon located next to it and then select Unpair or
Forget. Turn Total PA™ Freedom off and back on and try pairing again once it reappears
in your available devices list.
Note: If Total PA™ Freedom has been paired to another audio device recently that is still
within range, you may need to repeat this process with that audio device to fully
disconnect.
If you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
off a speaker that was linked to your unit or if you have just turned on your unit and it is in
™
Stereo-Link mode. To stop the audio dropouts, exit Stereo-Link
™
the Stereo-Link / Repeat button. Alternatively, you can wait for your unit to link to another
speaker if there is one within range.
ION Audio Total PA™ Freedom User Guide
™
mode by double-pressing
19