Safety Decals - Woods BSS54 Operator's Manual

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
1 - Serial Number Plate
Keep safety decals clean and visible.
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a pres-
sure washer; high-pressure water can enter through
very small scratches or under edges of decals causing
them to peel or come off.
Replace safety decals if they are missing or illegible.
Replacement safety decals can be ordered free from
your Woods dealer. To locate your nearest dealer, check
the Dealer Locator at www.WoodsEquipment.com, or
in the United States and Canada call 1-800-319-6637.
MAN0761
( 06/07/2023 )
MAN0761_2023-06.indd 7 MAN0761_2023-06.indd 7
SAFETY & INSTRUCTIONAL DECALS
Replace Immediately If Damaged!
BE CAREFUL!
2
3
4
1
2 - PN 55122
WARNING
TO AVOID SERIOUS INJURY OR DEATH:
Read Operator's Manual before operating, servicing or
repairing equipment. Follow all safety rules and
instructions. (Manuals are available from dealer or call
1-800-319-6637.)
Operate from tractor seat only.
Lower equipment to ground, stop engine, remove key
and set brake before dismounting tractor.
Never allow children or untrained persons to operate
equipment.
Never allow riders.
Keep bystanders away from equipment during operation.
Keep all shields in place and in good condition.
Do not transport towed or semi-mounted units over 20
mph.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN
RESULT IN INJURY OR DEATH.
CD7557
55122-D
Safety 7
2/8/24 8:57 AM 2/8/24 8:57 AM