Woods GS54.30 Operator's Manual page 11

GSXX.40 Models
CAT 2
CLEVIS
CAT 1
CLEVIS
SLEEVE
FOR QUICK
HITCH TOP
7
(SLEEVE FOR CAT 1
AND 2 QUICK HITCH )
Figure 4. GSXX.40 Models
Category 1 Three Point Hitch
1. Attach tractor's lower 3-point arms to scraper lower
hitch pin (11) in the inner clevis of hitch bracket.
Secure in place with klik pin (18).
2. Attach tractor top link to upper hole in mast plates
using tractor heavy-duty top link pin. Secure with re-
taining pin supplied with tractor top link.
3. When using a Category 1 Quick Hitch, install sleeve
(7) on inner clevis of lower hitch bracket and secure
with klik pin.
4. Quick Hitch attaches to lower hitch pin sleeves and
sleeve between mast plates.
Category 2 Three Point Hitch
1. Attach tractor's lower 3-point arms to sleeve (8) and
scraper lower hitch pin (11) in the outer clevis of
hitch bracket. Secure in place with klik pin (18).
2. Attach tractor top link to sleeve (10) and upper hole
in mast plates using tractor heavy-duty top link pin.
Secure with retaining pin supplied with tractor top
link.
3. When using a Category 2 Quick Hitch, install sleeve
(7) on outer clevis of lower hitch bracket and secure
with klik pin.
4. Quick Hitch attaches to lower hitch pin sleeves and
sleeve between mast plates.
MAN1378
( 03/07/2024 )
MAN1378_2024-03.indd 11 MAN1378_2024-03.indd 11
10 (SLEEVE FOR
CAT 2 TOP LINK)
CAT 1 TOP LINK
CONNECTION
18
11
8
CD9410
(SLEEVE FOR
CAT 2 LOWER ARM)
Quick Hitch Connection
NOTICE
■ The 20 mm bolt and sleeve in the lower hole
provide the attachment point for a Category 1
or 2 quick coupler. Do not remove this bolt and
sleeve when operating the scraper.
For Category 1 quick hitch application, place hitch
sleeves over mounting pin.
Align quick hitch with 3-point mount pins and top spac-
er sleeve between the right and left mast plates.
For Category 2 quick hitch, make sure sleeves are in
outer clevis position on lower 3-point pins.
The top quick hitch hook will seat into spacer sleeve.
This sleeve does not interfere when unit is used with a
standard 3-point hitch.
Figure 5. Top Quick Hitch Hook Connection
ADJUSTING TOP LINK
The grading scraper is leveled by adjusting the length
of the tractor's top link.
● Shortening the top link will deepen the scarifier tooth
penetration.
● Lengthening the top link will provide better scraping
and leveling action.
Experience will allow the operator to determine the
best setting for the application being done.
NOTICE
This unit is intended to move materials such as
dirt, sand, gravel, etc. Unintended use may damage
the grading scraper.
Operation 11
3/7/24 8:58 AM 3/7/24 8:58 AM