HP 3468A Operator's Manual page 43

i AT
LVuLEAL
LOCAL |
Comments
The LOCAL
command clears the 3468A
from the REMOTE operation mode and
TRIGGER
5 TRIGGER |
mments
lf the 3468A is in the listener mode or is the selected device, the TRIGGER
message will cause the multimeter to trigger for a new reading. If a reading is in
progress when the TRIGGER command is received, the reading will be aborted and
a new reading started.
INSTAT
INSTAT
nn
Comments
The INSTAT {INput STATus) function causes the 3468A (or selected device) to
output its eight bit Status Byte. A decimal value is placed into the X-register of
the calculator. This value is the sum of the values of the bits that are set, within
the lower
six bits. The entire eight bits are also transferred
to user Flags OO
through 07 in the calculator, with status byte bit O placed in Flag 00, bit 1 to
Flag 01, etc. This allows testing of individual bits (Flags).
38