Table of Contents
Advertisement
Upgrade firmware
To improve the performance of SW700M, Philips
may offer you new firmware for upgrade of your
SW700M.
Warning
•
Always connect your SW700M to AC power for
firmware upgrade. Never power off your SW700M nor
close the app during firmware upgrade.
1
Make sure that SW700M is powered on and
connected to the same Wi-Fi network as
your smartphone or tablet.
2
Make sure that your home Wi-Fi network is
connected to the Internet.
3
Run SpeakerSet on your iOS or Android
smartphone or tablet.
4
Tap the speaker image to see options
available for the speaker.
5
Tap Firmwareupgrade to enter the
firmware upgrade page.
6
Tap Check online to see whether any new
version of firmware is available.
7
If a new version is available, tap Update to
start firmware upgrade.
» The system status indicator on the
front panel blinks amber and red
alternately during this process.
8
Wait until the firmware upgrade process
finishes, then tap OK to reboot the
speaker.
Tip
•
Depending on the network connection, it may take 10
minutes to finish upgrade.
EN
19
Advertisement
Table of Contents
