Table of Contents
Advertisement
STEP 2 Remove the shipping bolts
1.
Unpack the product from the package and remove all shipping bolts.
2.
Insert the bolt caps (B) into the holes (marked with circles in the figure).
NOTE
The number of shipping bolts may differ depending on the model.
WARNING
•
To avoid injury, cover the holes with bolt caps after removing the shipping bolts. Do not move the washing
machine without the shipping bolts in place. Assemble the shipping bolts before moving the washing machine to
another location. Keep the shipping bolts in a safe place for future use.
•
Packaging materials can be dangerous to children. Dispose all packaging material (plastic bags, polystyrene,
etc.) out of children's reach.
STEP 3 Adjust the levelling feet
Adjust the levelling feet to level the washing machine. Once the washing machine is level, tighten the locking nuts
with a spanner.
CAUTION
Make sure all the levelling feet are seating on the floor surface to avoid the washing machine from moving or
generating noise due to vibration. Then, check if the washing machine is rocking. If the washing machine is not
rocking, tighten the locking nuts.
DC68-04508B-02_IB_B-PJT-B11_WASHER_SimpleUX_EN.indd 13
A
CAUTION
When installing the product make sure the levelling feet are not pressing the
power cord.
B
English 13
2024-03-15
5:42:35
Advertisement
Table of Contents
