Table of Contents
Advertisement
•
Keep the door open so that inside the drum and detergent drawer can be well ventilated.
•
Always keep the detergent drawer and the auto dispenser covers closed except when adding detergent and/or
softener. Air can enter all the way inside and can dry out the detergent and/or softener.
•
Some detergent may leak from the detergent drawer while removing the drawer from the washing machine.
This is normal.
•
Verify the dispenser openings, turn the caps to open, and then fill with detergent or softener up to the MAX line.
•
Do not use a mixture of a detergent and a softener.
•
Always keep the dispensers with the cap closed.
Setting the amount of detergent/softener input
Follow these instructions to increase or decrease the amount of detergent/softener dispensed automatically.
1.
Tap .
2.
Turn the Navigation dial to select Dose Per Wash or Dose Per Rinse.
•
Dose Per Wash: You can select the amount of detergent to input.
•
Dose Per Rinse: You can select the amount of softener to input.
3.
Tap O to change the setting.
•
Default setting is Med., and you can select from Med., High, Off, or Low.
Setting the water hardness/softener concentration level
1.
Tap and hold
for 3 seconds.
2.
Turn the Navigation dial to select Water Hardness or Softener.
3.
Tap O to change the setting.
•
The default setting for Water Hardness is Med. Changing the setting adjusts the amount of detergent dose.
Water Hardness setting
Amount of detergent dose
•
The default setting for Softener is 1x. Changing the setting adjusts the amount of softener dose.
Softener setting
Amount of softener dose
16
English
DC68-04508B-02_IB_B-PJT-B11_WASHER_SimpleUX_EN.indd 16
Soft
Decreased
1x
Normal
Dose per Wash
Eco 40-60
For optimal performance
'OK' to set auto dispense
Water Hardness
Eco 40-60
For optimal performance
OK' to set the hardness level
Med.
Normal
2x
Decreased
Med.
Med.
Hard
Increased
3x
Even more decreased
2024-03-15
5:42:37
Advertisement
Table of Contents
