Table of Contents
Advertisement
SETTING NOTCHED CARRIER
When setting the individual decorative stitches, tracer 8 3 is moved with selector lever 1 8
from one control cam to the other.
This ist performed a) by rising the tracer
b) by moving the selector lever
During lifting, the notched carrier limits the selector lever on the right.
The notched carrier 8 7 must, therefore, be ser so thar the tracer 8 3 no longer contacts the
control cam when moved. On the other hand, it must only be raised sufficiently for the
needle still t o penetrate in the stitch hole (far left).
If correction is necessary the three screws 84,85,86 must be loosened and the notched
carrier 8 7 moved to the desired position.
Tighten the three screws.
IMPORTANT: The stitch pointer must also be reset after adjusting the notched carrier.
Advertisement
Table of Contents
