Table of Contents
Advertisement
en Transportation and disposal
Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note: Heat-resistant, 25-watt, 230 V halogen bulbs are
available from the after-sales service or specialist retail-
ers. Only use these bulbs. Hold the new halogen bulbs
only with a clean, dry towel. This increases the service
life of the bulb.
WARNING ‒ Risk of burns!
The appliance and its parts that can be
touched become hot during use.
▶ Caution should be exercised here in order to
avoid touching heating elements.
▶ Young children under 8 years of age must be
kept away from the appliance.
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket con-
tacts are live.
▶ Before replacing the bulb, ensure that the appli-
ance is switched off in order to prevent a poten-
tial electric shock.
▶ Also unplug the appliance from the mains or
switch off the circuit breaker in the fuse box.
Transportation and disposal
16 Transportation and disposal
You can find out here how to prepare your appliance
for transportation. You will also find out how to dispose
of old appliances.
16.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environmentally
3.
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
20
Requirements
¡ The appliance is disconnected from the power sup-
ply.
¡ The cooking compartment has cooled down.
¡ You have a new halogen bulb to replace the old one.
Place a tea towel in the cooking compartment to
1.
prevent damage.
Turn the glass cover anti-clockwise to remove it.
2.
Pull out the halogen bulb without turning it.
3.
Insert the new halogen bulb and press it firmly into
4.
the socket.
Make sure the pins are positioned correctly.
Depending on the appliance model, the glass cover
5.
may have a sealing ring. Attach the sealing ring.
Screw in the glass cover.
6.
Remove the tea towel from the cooking compart-
7.
ment.
Connect the appliance to the power supply.
8.
16.2 Transporting the appliance
Keep the original appliance packaging. Only transport
the appliance in the original packaging. Observe the
transport arrows on the packaging.
Secure all moving parts in and on the appliance us-
1.
ing adhesive tape that can be removed without leav-
ing any traces.
Slide all accessories, such as baking trays, into the
2.
corresponding slots with thin cardboard at the
edges, in order to avoid damaging the appliance.
Place cardboard or similar between the front and
3.
rear side to prevent knocks against the inside of the
door glass.
Secure the door and, if available, the top cover to
4.
the appliance sides using adhesive tape.
If the original packaging is no longer available
In order to guarantee sufficient protection against
1.
any transport damage, pack the appliance in pro-
tective packaging.
Always transport the appliance upright.
2.
Do not hold the appliance by the door handle or the
3.
connections on the rear, as these could be dam-
aged.
Do not place any heavy objects on the appliance.
4.
Advertisement
Table of Contents
