Table of Contents
Advertisement
en Rails
Requirement: Prepare the appliance for the cleaning
function. → Page 15
Use the function selector to set the
1.
tion.
a The display shows the duration. The duration of
one hour cannot be changed.
Use the temperature selector to set the cleaning
2.
level .
a After a few seconds, the cleaning function starts and
the duration counts down.
a When the cleaning function ends, a signal sounds
and the duration is at zero in the display.
Switch off the appliance.
3.
Wipe the appliance. → Page 16
4.
Rails
13 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
13.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the front rail upwards and unhook it.
1.
Then push the entire rail to the front and remove it.
2.
16
12.4 Wiping the appliance after the cleaning
function
cleaning func-
1.
2.
3.
13.2 Attaching the rails
1.
2.
Allow the appliance to cool down.
Wipe the cooking compartment with a damp cloth.
Note: During operation and while the cleaning func-
tion is active, reddish patches may form on the sur-
faces. This is not corrosion but rather residue from
food that contains salt. Nutrients such as sugars
and proteins are not removed from the surface coat-
ing and may stick to the surface. These spots are
not harmful and do not impair the cleaning ability of
the self-cleaning surfaces.
Attach the shelf supports.
→ "Rails", Page 16
First insert the rail into the rear socket, press it to
the back slightly
and insert it into the socket at the front.
The rails fit both on the left and right sides. Shelf po-
sitions 1 and 2 are located at the bottom and shelf
positions 3, 4 and 5 are located at the top. Pull out
the telescopic rail towards the front.
Advertisement
Table of Contents
