Table of Contents
Advertisement
en Basic operation
Tip: You can define whether the time is shown in the
display in the basic settings.
5.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
Remove the accessory and the leftover packaging,
1.
such as polystyrene pellets, from the cooking com-
partment.
Before heating, wipe the smooth surfaces in the
2.
cooking compartment with a soft, damp cloth.
Ventilate the room while the appliance is heating.
3.
Basic operation
6 Basic operation
6.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
6.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
6.3 Types of heating and temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
Rapid heating
7 Rapid heating
To save time, you can use the rapid heating to shorten
the preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heating, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
7.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Time-setting options
8 Time-setting options
Your appliance has different time-setting options which
ensure that operation can be controlled.
10
Set the type of heating and the temperature.
4.
→ "Basic operation", Page 10
Type of heat-
3D hot air
ing
Temperature
Maximum
Cooking time
1 hour
Switch off the appliance after the specified cooking
5.
time.
6.
Wait until the cooking compartment has cooled
down.
Clean the smooth surfaces with soapy water and a
7.
dish cloth.
Clean the accessory with soapy water and a dish
8.
cloth or a soft brush.
When the dish is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
¡ You can also set a cooking time and an end time
on the appliance.
→ "Time-setting options", Page 10
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Turn the temperature selector to set the desired
▶
temperature.
Use the function selector to select rapid heating .
1.
Use the temperature selector to set the required
2.
temperature.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
Place the food in the cooking compartment.
4.
8.1 Overview of the time-setting options
You can use the
button to select the different time-
setting options.
Advertisement
Table of Contents
