Setting Up The Home Connect App; Setting Up Home Connect; Remote Start; Data Protection - Siemens iQ700 SN27ZI04CZ Information For Use

en Home Connect
16.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
16.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
The appliance door is closed.
¡
Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the
2.
Home Connect app.
16.3 Remote Start
You can use the Home Connect app
to start the appliance with your mo-
bile device.
Tip: If you select "Permanent" in the
Basic settings → Page 38 of this
function, the function is permanently
activated and you can start your ap-
pliance with a mobile device at any
time.
40
Activating Remote Start
When you have selected "Manual" in
the basic settings of this function, ac-
tivate the function on your appliance.
Requirements
The appliance is connected to your
¡
WLAN home network.
The appliance is connected to the
¡
Home Connect app.
"Manual" is selected in the Basic
¡
settings → Page 38 of this function.
A programme is selected.
¡
Press ⁠ .
▶
If you open the appliance door, the
function is automatically deactiv-
ated.
button lights up.
a
Tip: To deactivate the function, press
⁠ .
16.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.