Table of Contents
Advertisement
en Rinse aid system
Note: Only use special salt for
3.
dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dis-
penser.
Fill the dispenser right up with spe-
cial salt. The water in the dis-
penser is displaced and forced
out.
Place the lid back on the dis-
4.
penser and turn to close.
10.4 Switching off the water
softening system
If you find the special salt refill indic-
ator irritating, e.g. when using com-
bined detergents with salt replace-
ment substances, you can switch the
indicator off.
Note
To avoid damage to the appliance,
only switch off the water softening
system in the following cases:
The water hardness is max. 26 °E
¡
and you are using a combined de-
tergent with salt replacement sub-
stances. According to the manu-
facturers, combined detergents
with salt replacement substances
can generally only be used up to a
water hardness of 26 °E without
adding special salt.
28
The water hardness is 0 - 8 °E.
¡
You do not need to use special
salt.
Press
.
1.
To open the basic settings, press
2.
for approx. 3 seconds.
Press
repeatedly until the display
3.
shows "Water hardness".
Press
or
4.
display shows 0 - 8.
To save the settings, press
5.
approx. 3 seconds.
The water softening system is
a
switched off and the salt refill indic-
ator is deactivated.
Rinse aid system
11 Rinse aid system
Rinse aid system
11.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the display shows "Please add
rinse aid. ", add rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
.
repeatedly until the
and lift
2
1
for
Advertisement
Table of Contents
