Siemens IQ300 SN93HX60CG User Manual
Hide thumbs
Also See for IQ300 SN93HX60CG:
- Quick reference manual (2 pages) ,
- Quick reference manual (2 pages)
Related Manuals for Siemens IQ300 SN93HX60CG
Summary of Contents for Siemens IQ300 SN93HX60CG
- Page 1 Dishwasher SN93HX60CG User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Bottom basket ........ 20 General information...... 4 Cutlery drawer ........ 21 Intended use........ 4 Etagere ........... 21 Restriction on user group.... 4 Folding prongs ....... 21 Safe installation ........ 5 Basket heights........ 22 Safe use ........... 6 Before using for the first time .. 22 Damaged appliance ...... 7 Performing the initial configura- Risk to children ........ 8... - Page 3 Customer Service...... 55 Starting the programme .... 32 Product number (E-Nr.), produc- Interrupting programme .... 32 tion number (FD) and consecut- Terminate programme.... 32 ive numbering (Z-Nr.) ..... 56 Switching off appliance .... 32 AQUA-STOP guarantee .... 56 Basic settings........ 33 Technical specifications.... 56 Overview of basic settings ..... 33 Information regarding Free and Changing basic settings.... 34...
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. -
Page 5: Safe Installation
Safety en Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. WARNING ‒ Risk of electric shock! ¡... -
Page 6: Safe Use
en Safety ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡... -
Page 8: Risk To Children
en Safety ▶ Never operate an appliance with a cracked or fractured sur- face. ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap. -
Page 9: Safety Systems
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. -
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish ▶ Environmental protection and saving energy Environmental protection on the appliance, do not use sponges with a rough surface or and saving energy abrasive cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Installation And Connection
en Installation and connection soiling level is lower, the rinsing wa- over, e.g. by screwing it to the wall or ter is used in the next wash cycle, so installing it under a continuous work- reducing water consumption by 3-6 top that is securely connected to ad- litres. -
Page 13: Drinking Water Connection
Installation and connection en The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 56. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme buttons "Water softening system" → Page 23 Special salt refill indicator "Rinse aid system"...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Programmes Programme Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 19 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Drying household food remnants lightly dried-on. -
Page 19: Additional Functions
Additional functions en Press . Additional func- Press the right programme button. tion → "Programmes", Page 17 ¡ Switch on with small Press the button for the relevant loads. Half Load additional function. ¡ It is recommended → "Additional functions", Page 19 adding less detergent Press for approx. -
Page 20: Top Basket
en Features Raise or lower the basket evenly to Top basket the right level. Arrange cups and glasses in the top → "Basket heights", Page 22 basket. Check that the basket is level on both sides. You can adjust the height of the top Slide the basket back in. -
Page 21: Cutlery Drawer
Features en Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery drawer Arrange cutlery in the cutlery drawer. If you do not need the cutlery shelf, you can fold it up. -
Page 22: Basket Heights
en Before using for the first time Push the lever forwards and fold To use the prongs again, fold them down the prongs . back up. a The prongs audibly click into posi- tion. Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Setting Top basket... -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 33 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. The consumption values specified ¡ The water hardness is 0 - 8 °E. are laboratory measurements determ- You do not need to use special ined in accordance with the currently salt. -
Page 26: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en Modern, powerful detergents mainly Tip: Suitable detergents are available use a low-alkaline formulation with online via our website or from "Cus- enzymes. Enzymes break down tomer Service" → Page 55. starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally used to remove coloured marks, e.g.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡... -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en cient programme for the combina- Removing tableware tion of energy/water consumption for this type of tableware and evid- WARNING ences conformity with the EU Eco- Risk of injury! design Directive. Hot tableware can cause burns to the If you do not perform any actions skin. -
Page 32: Starting The Programme
en Basic operation Press . Terminate programme a This activates timer programming. To end a programme early or to Tip: To deactivate timer program- switch from a programme that has ming, press repeatedly until "h:00" already started, you will need to can- appears in the display. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Changing Basic Settings
en Basic settings Basic setting Display text Selection Description SideLight I00 - I01 While the programme is running, a strip of light appears on the left-hand side of the appliance. If the appli- ance door is not completely closed, the strip of light will flash. The pro- gramme has ended when the strip of light is no longer visible on the left- hand side. -
Page 35: Home Connect
Home Connect en Press repeatedly until served when operating the appliance the display shows the required set- via the Home Connect app. ting. → "Safety", Page 4 Press repeatedly until the dis- Home Connect quick start play shows the right value. You can change several settings. Connect your appliance to a mobile To save the settings, press device quickly and easily. -
Page 36: Home Connect Settings
en Home Connect ance connected to the Home Con- Home Connect settings nect server and if Remote Dia- Adapt Home Connect to your needs. gnostics is available in the country in You can find the Home Connect set- which you are using the appliance. tings in the basic settings for your ap- Tip: For further information and de- pliance. -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. -
Page 38: Filter System
en Cleaning and servicing Phase Removal of Detergent Placement Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters. - Page 39 Cleaning and servicing en Press the locking catches Cleaning filters gether and lift the coarse filter out Soiling in the dishwashing water may . block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ...
-
Page 40: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 42: Error Code / Fault Display / Signal
en Troubleshooting Fault Cause Troubleshooting Appliance door does not Appliance door and door Clean the appliance door and door ▶ open. seal are soiled. seal with a damp cloth and a little washing-up liquid. Automatic door opening is Wait one second after closing the ▶... - Page 43 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 44: Washing Results
en Troubleshooting Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 45 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Washing programme selec- Select a more intensive washing ▶ ware. ted too weak. programme. → "Programmes", Page 17 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
- Page 47 Troubleshooting en Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 17 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 48 en Troubleshooting Fault Cause Troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable "Detergent " ▶ → Page 26 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
- Page 49 Troubleshooting en Fault Cause Troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
-
Page 50: Home Connect Problem
en Troubleshooting Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 51: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 24. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 52: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. -
Page 53: Noise
Troubleshooting en Noise Fault Cause Troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶... -
Page 54: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 55: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 56: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications which your appliance was placed on from water damage, the appliance the market within the European Eco- must be connected to the power nomic Area. supply. ¡ The liability guarantee is valid for Note: Under the terms of the manu- the service life of the appliance. -
Page 57: Information Regarding Free And Open Source Software
Technical specifications en Information regarding Free Power consumption Off mode/standby mode: 0.50 W and Open Source Software Left-on mode: 0.50 W This product includes software com- Networked standby: ponents that are licensed by the 2.00 W copyright holders as free software or Time in left-on mode: open source software. - Page 58 2014/53/EU. 2.4 GHz band: 100 mW max. A detailed RED Declaration of Con- 5 GHz band: 100 mW max. formity can be found online at www.siemens-home.bsh-group.com among the additional documents on the product page for your appliance. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 60 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001585012* 9001585012 (010105) 650 V5...