Table of Contents
Advertisement
14.3 Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
When the programme has ended,
▶
do not empty the appliance until
the tableware has cooled down for
a while.
To prevent water dripping on the
1.
tableware, unload it starting at the
bottom and working up.
Check the washing tank and ac-
2.
cessories for soiling and clean if
necessary.
→ "Cleaning and servicing",
Page 39
Basic operation
15 Basic operation
Basic operation
15.1 Opening appliance door
If door opening "c00" is selected in
1.
the basic setting, press on the up-
per middle section of the appli-
ance door.
If the childproof lock is activated,
2.
press on the upper middle section
of the appliance door twice with a
short interval in between.
The appliance door will open auto-
a
matically.
Tip: If you use the appliance with a
handle mounted on the door, you ac-
tivate the setting "c02".
15.2 Switching on the appli-
ance
Press
.
▶
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
15.3 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the right programme button.
▶
The programme is set and the pro-
a
gramme button flashes.
The remaining running time of the
a
programme appears on the dis-
play.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 21
The additional function is set and
a
the additional function button
flashes.
Basic operation en
33
Advertisement
Table of Contents
