Checking The Signal Strength; Installing Updates For The Home Connect Software - Siemens iQ300 KF96NA Series Information For Use

Table of Contents

Advertisement

Available languages

Available languages

en Home Connect
Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the
2.
Home Connect app.
10.3 Checking the signal
strength
You should check the signal strength
if no connection could be estab-
lished.
Press and hold
1.
15 seconds.
The temperature display (freezer
a
compartment) shows
Press
2.
temperature display (freezer com-
partment) shows .
The temperature display (refriger-
a
ator compartment) shows a value
between
(no reception) and
reception).
Note: The signal strength should be
at least .
Improving the reception
If the signal strength is too weak, the
connection may be interrupted.
Carry out one of the solution op-
tions:
Place the router and refrigerator
closer together.
Ensure that the connection is
not interfered with by screening
walls.
46
for
.
repeatedly until the
Install a repeater to strengthen
the signal.
10.4 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display (freezer compart-
ment) shows
To cancel the update and reset the
temperature display (freezer compart-
ment) to the set temperature, press
any touch field.
Press and hold
1.
15 seconds.
The temperature display (freezer
a
compartment) shows
Press
2.
temperature display (freezer com-
partment) shows
perature display (refrigerator com-
partment) shows
Press
3.
The temperature display (refriger-
a
ator compartment) shows an anim-
ation.
The update is installed.
a
(full
The control panel is locked during
a
the installation.
If the installation is successful, the
a
temperature display (refrigerator
compartment) shows
If the temperature indicator (refri-
4.
gerator compartment) shows
the appliance was unable to install
the update.
Repeat the process at a later
point.
If the update cannot be completed
5.
after several attempts, contact cus-
tomer service → Page 56 .
.
for
.
repeatedly until the
and the tem-
.
.
.
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq300 kf96naxea

Table of Contents