Operating Tips; Switching Off The Appliance; Setting The Temperature; Button Lock (Childproof Lock) - Siemens iQ300 KF96NA Series Information For Use

en operation
Switch off the warning tone using
2.
.
goes out as soon as the set
a
temperature has been reached.
Set the required temperature.
3.
→ Page 42
7.2 Operating tips
Once you have switched on the
¡
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
The front and side panels of
¡
the housing heat up occasionally.
This prevents condensation from
forming.
When you close the door, a va-
¡
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
The temperature in the appliance
¡
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
Disconnect the appliance from the
▶
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
42
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
Press
▶
temperature display (refrigerator
compartment) shows the required
temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the freezer compartment
temperature
Press
▶
temperature display (freezer com-
partment) shows the required tem-
perature.
The recommended temperature in
the freezer compartment is
−18 °C.
7.5 Button lock (childproof
lock)
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Switching on the button lock
Press and hold
▶
three seconds.
lights up.
a
Switching off the button lock
Press and hold
▶
three seconds.
goes out.
a
repeatedly until the
repeatedly until the
for
for